Teflon Solar Laminator Release Fabric/Wind Turbine Blades Teflon Release Fabric/PTFE Breathable Fabric/PTFE Teflon Breathable Fabric/Teflon Mould Release Fabric/Solar Laminator Teflon Release Fabric/Wind Turbine Moulding Release Fabric/Wind Turbine Moulding Release Liner/Teflon Peel Ply Release Fabric/PTFE Teflon Peel Ply Fabric

The Fuction of teflon fabric on the Solar Laminator.

Before the Laminator selling to us, we found that 2pcs of teflon fabric was on the machienry. The purpose is make notice to our user the fabric was importance to obstruct the thawy EVA film to stick on the top of Silicone Rubber and bottom of laminator heating plate. Once the EVA film leaves on was hard to cleanning up.

2>. The correct way to using teflon fabric.

One Solar Laminator should be prepare 2sets of teflon fabric (4pcs fabric ). Once finished laminating, pls do not repeat using the previous teflon fabric, but rolling the teflon fabric and put it away and let it cooling down and easy to cleanning up the EVA film on fabric to ensure the fabric have the lustre like previous one. IF the EVA have not or can not remove from the fabric, then twice laminating, these EVA will be stick on the Solar Pannel Glass, Then it's can not be wipe even you use the alcohol. Once this kind of Solar Pannel was installed on the outdoors, EVA will be thawy again and will be have the dusts be adsorbed on the glass to prevent the sunshing , if it is continus will be have HOT SPOT EFFECT.

3>. Attention for using teflon fabric.

a).Before we cutting the fabric, should be insure the fabric surface was flat, do not have the wrinkles. Otherwise the Solar TPT,TPE or KPK will be also have the wrinkles to effect the using life.

b).During the using time, the fabric surface have the EVA film leave on fabric, use the wet duster cloth to wipe it .

c).Difference produced teflon fabric color was not keep the same, that's normal performance.It does not affect the product quality, but will not affect the use!

1. What are our advantage to start business with you ? 

(1) Prompt delivery. We have six big coating machines and some other small machines.

The delivery time is about 5-15 days.

(2) Reasonable price. Our machines are imported, which can improve the work efficiency,

thus we can provide you high quality with competitive price.

(3) Variety choices. Our products are divided into economical series and premium series.

We can fulfill a variety of requirements for you and bring best benefits for each other. 

2. Do you have a good material stock for quick delivers ?

We have a good material stock for quick delivers. Every time we produce a large amount,

we will produce more than the specific quantity. For these products, we can sell to our small distributors for the quick order.

3. How wide is your standard production in PTFE fiberglass fabric ?

The standard width is 1250mm. The max width is 3850mm.The min width is 1000mm.

We can also provide you the customized items if required.

4. What about the MOQ ?

For the regular thickness and width, we can provide you any quantity you need.

5. What about the raw material you use ?

We use imported fiberglass from Taiwan and the PTFE resin is imported from Daikin and DuPont.

6. Do you have the specific QC department ?

Of course we have the specific QC department.Our company applies strict quality control system and service system.

7. What about the warranty?

We are quite confident in our products.We have special quality control department who will 100% check each

goods before shipment,and we can assure you all the goods sent out are in good conditions.When customers

receive the goods in 15 days,if,unfortunately,there occurs broken ones,please tell us and show us the detailed proof

so we can check it and give certain replacement in the next order.

8. How to order samples?

We can provide FREE samples,but you need to afford the freight.If you place an order next time,we will return the samples freight to you.